Choose another country or region to see content specific to your location.

Maintenance & Service Aids

A total solution for maintenance, repair and overhaul

Electrolube FRE freezer spray being used on a PCB
  • Syringes, pump sprays, tubes, aerosols, wipes, and pens
  • Air duster and freezer sprays
  • Cleaners and wipes
  • Greases and oils
  • Encapsulation resins and conformal coatings
  • Maintenance, test, repair and small scale production
  • Paints and galvanising sprays

Electrolube manufactures a wide range of maintenance products to complement the major product groups. Whether used by OEMs or subcontractors, these products are supplied in convenient packaging, covering a wide range of applications and requirements.

More info > Download product selector chart > Download product brochure >

Specific products in this range include:

  • Airdusters For the removal of dust and dirt from hard to reach places, for example, in photographic and electrical equipment. They can also be used to blast off water or solvents for rapid drying.
  • Freezer Sprays For the identification of faulty components by rapidly cooling components to -55C. Freezers are available in standard or minimal charging forms, enabling safe use on static sensitive components.
  • General Maintenance Including hard surface cleaners, cyanoacrylate adhesives, tamper evident seals and contact cleaner lubricants.
  • Industrial Maintenance Including high quality paints, galvanising sprays, polyurethane foam, lubricants and graffiti removers.

Electrolube can provide a total solution for mobile mechanics and service engineers through the wide range available. Products are supplied in a range of packaging dependent upon their application and end use. These include aerosols, pump sprays, syringes, tubes, pens, sachets and small tins.

Maintenance & Service Aids

CCRG - Conformal Coating Remover Gel

Conformal Coating Remover Gel

1 Litre

Product code: CCRG01L

CCRG thixotropic gel is for the removal of conformal coatings for rework or repair purposes. It has been specifically formulated to remove Electrolube's solvent resistant coatings: DCA, DCB, DCR, DCRT, DCE,WBP/S and PUC. The product does not contain methylene chloride.

CCRG will not generally damage metals; however, there may be some corrosion on ferrous metals if materials are soaked for prolonged periods. CCRG will attack several plastics and also remove component identification markings if prolonged exposure is permitted. Where possible, a compatibility test with sensitive plastics should be conducted prior to full-scale use. A removal solvent (RRS) is also supplied, should a liquid product be required. CCRG is highly flammable so care must be taken when using this material. Refer to the Material Safety Data Sheet for additional information

Key Properties:
  • Allows localised removal of components
  • For Removal of solvent resistant conformal coatings
  • Can be used in conjunction with RRS, Resin Removal Solvent for complete coating removal
  • Water rinsable
  • Does not contain methylene chloride
  • RoHS Compliant

Additional information

Product data sheets
CCRG (tds) Download

Log into our MSDS database for Safety Data Sheets: MSDS